Paino Hinge Mild Steel 50X1.5X1828

Piano Hinge Galv 100X1.5X1800

Tila Band 180/22/3000MM Super Continuous

TILA Aluminium and Rubber Continuous Hinge - 3m - With Pre-Drilled holesSuitable for doors, tailgates, and canopies.Only minimal external protrusion. A contribution towards road safety since the risk of injury caused by dangerous, protruding...

Piano Hinge 25X1.1X160Ms 3.18 Pin

Piano Hinge 25mm wide, open X 1.1mm thick X 160mm long in Mild steel with 3.18mm Stainless Steel Pin.

Piano Hinge Galv 63X1.6X2160MM - 05226

Width – 63mm   Gauge – 1.6mm   Length – 2160mm   Pin Diameter – 4.76mm. Galvabond.

Piano Hinge S/S 32X1.2X1200MM With Holes

Width – 32mm   Gauge – 1.2mm   Length – 1200mm   Pin Diameter – 3.18  Stainless Steel 304 (S/S Pin). Pre-drilled. Australian Made.

Piano Hinge 2.4m

Width – 32mm   Gauge – 1.2mm   Length – 2438mm   Pin Diameter – 3.18  Stainless Steel 304 (S/S Pin).

Piano Hinge S/S 25X1.2X1800MM

Width – 25mm   Gauge – 1.2mm   Length – 1800mm   Pin Diameter – 3.18  Stainless Steel 304 (S/S Pin). Australian Made.

Piano Hinge S/S 50 Pre-Drilled

Width – 50mm   Gauge – 1.2mm   Length – 1800mm   Pin Diameter – 3.18   Knuckle – 25mm   Stainless Steel 304 (S/S Pin). Pre-drilled. Australian Made.

Piano Hinge S/S 50X1.2X1800MM - 05141

Width – 50mm   Gauge – 1.2mm   Length – 1800mm   Pin Diameter – 3.18   Knuckle – 25mm   Stainless Steel 304 (S/S Pin). Australian Made.

Piano Hinge Galv 38X1.2X1800MM

Width – 38mm Gauge – 1.2mm Length – 1800mm Pin Diameter – 3.18 Knuckle – 20mm Galvabond (Brass Pin)

Piano Hinge Galv 76MMx1.5X2160MM

Width – 76mm Gauge – 1.6mm Length – 2160mm Pin Diameter – 4.76 Knuckle – 40mm Galvabond (Brass Pin)

Piano Hinge Galv 50X1.2X1800MM - C5234

Width – 50mm Gauge – 1.2mm Length – 1800mm Pin Diameter – 3.18 Knuckle – 20mm Galvabond (Brass Pin)

Piano Hinge Galv 63X1.6X2160MM - C5226

Width – 63mm Gauge – 1.6mm Length – 2160mm Pin Diameter – 4.76 Knuckle – 40mm Galvabond (Brass Pin)

Piano Hinge S/S 38X1.2X1800MM - C5200

Width – 38mm Gauge – 1.2mm Length – 1800mm Pin Diameter – 3.18 Knuckle – 13mm Stainless Steel 304 (S/S Pin)

Piano Hinge S/S 32X1.2X1800MM - C5165

Piano hinge s/s 32x1.2x1800mm Width – 32mm Gauge – 1.2mm Length – 1800mm Pin Diameter – 3.18 Knuckle – 13mm Stainless Steel 304 (S/S Pin)

Piano Hinge S/S 50X1.2X1800MM - C5141

Width – 50mm Gauge – 1.2mm Length – 1800mm Pin Diameter – 3.18 Knuckle – 13mm Stainless Steel 304 (S/S Pin)

Piano Hinge S/S 76X1.6X2100MM - 05252

Width – 76mm   Gauge – 1.5mm   Length – 2100mm   Pin Diameter – 5.00mm. Stainless Steel 304 (S/S Pin). Australian Made.

Piano Hinge S/S 57X1.6X1800MM - 05085

Piano hinge s/s 57x1.6x1800mmWidth – 57mm Gauge – 1.6mm Length – 1800mm Pin Diameter – 4.76 Knuckle – 36mm Stainless Steel 304 (S/S Pin)

Piano Hinge S/S 125X2.5X2100MM - 05041

Width – 127mm Gauge – 2.5mm Length – 2100mm Pin Diameter – 6.30 Knuckle – 50mm Stainless Steel 304 (S/S Pin)

Piano Hinge S/S 63X1.6X1840MM - 05016

Width – 63mm Gauge – 1.5mm Length – 1828mm Pin Diameter – 5.00 Knuckle – 25mm Stainless Steel 304 (S/S Pin). Australian Made.

Piano Hinge S/S 50X 1.2X 980